Offshore steel structures and ship coating (heavy-duty)
Model

Pilot II alkyd

Jotun's Pilot II is a alkyd topcoat for atmospheric exposure conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for Pilot II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Pilot II — product overview

This is a one-component alkyd product, typically used as topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure; suitable for protective coating of steel.

Pilot II — positioning

Pilot II () — in the Jotun range — is a alkyd product normally used as topcoat where atmospheric exposure conditions apply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

It is used for protective coating work in atmospheric exposure conditions.

Pilot II — key data

ModelPilot II
Manufacturer product name
Resin systemalkyd
Componentsone-component
Typical number of coatstopcoat
Service environmentatmospheric exposure
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids48 % ± 2 %
Density (specific gravity)1.1 kg/l
Flash point36 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-pilot-ii.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry5 h4 h3 h1 h
Walk-on dry25 h14 h7 h3 h
Recoat, minimum36 h24 h16 h12 h

Data taken from the manufacturer's TDS jotun-pilot-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Pilot II — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Pilot II and the intended use.

Pilot II — common questions

Which substrates can Pilot II be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Pilot II?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Pilot II have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Pilot II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Pilot II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat