Penguard Midcoat epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Midcoat — product overview
Penguard Midcoat belongs to the epoxy system and is a two-component product used as intermediate coat; service environment atmospheric exposure; application and system notes are set out below.
Penguard Midcoat — positioning
Jotun's Penguard Midcoat is a epoxy intermediate coat for atmospheric exposure conditions, supplied with its technical documentation.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where high solids / high-build are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure conditions.
Penguard Midcoat — key data
| Model | Penguard Midcoat |
|---|---|
| Manufacturer product name | 1FQ |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / high-build |
| Colour range | Light yellow / grey / light red / emerald green / white |
| Application method | airless spray / brush |
| Volume solids | 82 % ± 2 % |
| Density (specific gravity) | 1.7 kg/l |
| Flash point | 25 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-midcoat.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 15 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 6 h | 4 h | 2 h |
| Walk-on dry | 9 h | 6 h | 3 h |
| Recoat, minimum | 9 h | 6 h | 3 h |
| Dried/cured for service | 10 d | 7 d | 5 d |
Data taken from the manufacturer's TDS jotun-penguard-midcoat.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as intermediate coat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 12944-2
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Penguard Midcoat follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Midcoat — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat and the intended use.
Penguard Midcoat — common questions
How many components does Penguard Midcoat have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Penguard Midcoat?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Penguard Midcoat take in the system?
This model is typically used as intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Penguard Midcoat
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Midcoat
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net