Jota EP15P epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jota EP15P — product overview
two-component epoxy product for use as primer / intermediate coat; fast-drying; substrates carbon steel / stainless steel; service environment atmospheric exposure.
Jota EP15P — positioning
Jota EP15P (0XT) is the epoxy primer / intermediate coat in the Jotun range; this page sets out its system position, parameters and supply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Jota EP15P — key data
| Model | Jota EP15P |
|---|---|
| Manufacturer product name | 0XT |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / stainless steel |
| Key characteristics | fast-drying |
| Colour range | Grey / White / Red / Aluminium |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 62 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jota-ep15p.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -5 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 10 h | 8 h | 6 h | 4 h | 2 h | 1 h |
| Walk-on dry | 30 h | 24 h | 16 h | 10 h | 5 h | 2 h |
| Recoat, minimum | 24 h | 20 h | 14 h | 8 h | 4 h | 2 h |
| Dried/cured for service | 28 d | 21 d | 14 d | 10 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-jota-ep15p.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jota EP15P — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Jota EP15P, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jota EP15P — common questions
Which coat does Jota EP15P take in the system?
This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Jota EP15P?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Jota EP15P?
This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Jota EP15P
- Jota EP15
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jota EP15P
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net