Penguard Midcoat MIO epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Midcoat MIO — product overview
Penguard Midcoat MIO belongs to the epoxy system and is a two-component product used as intermediate coat; service environment atmospheric exposure; application and system notes are set out below.
Penguard Midcoat MIO — positioning
Jotun's Penguard Midcoat MIO is a epoxy intermediate coat for atmospheric exposure conditions, supplied with its technical documentation.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
The model is notable for high solids / high-build.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Penguard Midcoat MIO — key data
| Model | Penguard Midcoat MIO |
|---|---|
| Manufacturer product name | 1FS |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / high-build |
| Colour range | Red / Grey |
| Application method | airless spray / brush |
| Volume solids | 82 % ± 2 % |
| Density (specific gravity) | 1.8 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-midcoat-mio.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 15 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 6 h | 4 h | 2 h |
| Walk-on dry | 9 h | 6 h | 3 h |
| Recoat, minimum | 9 h | 6 h | 3 h |
| Dried/cured for service | 10 d | 7 d | 5 d |
Data taken from the manufacturer's TDS jotun-penguard-midcoat-mio.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ISO 11890-1
- ISO 12944-2
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Penguard Midcoat MIO — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat MIO and the intended use.
Penguard Midcoat MIO — common questions
Which substrates can Penguard Midcoat MIO be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Penguard Midcoat MIO?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Penguard Midcoat MIO have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Penguard Midcoat MIO
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Midcoat MIO
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net