Penguard Midcoat MIO 80 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Midcoat MIO 80 — product overview
two-component epoxy product for use as intermediate coat; high solids / high-build; substrates steel; service environment atmospheric exposure.
Penguard Midcoat MIO 80 — positioning
Penguard Midcoat MIO 80 is the epoxy intermediate coat in Jotun's protective coatings line, specified for atmospheric exposure service.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Where high solids / high-build are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Penguard Midcoat MIO 80 — key data
| Model | Penguard Midcoat MIO 80 |
|---|---|
| Manufacturer product name | 1FT |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat |
| Service environment | atmospheric exposure |
| Key characteristics | high solids / high-build |
| Colour range | Red / Grey |
| Application method | airless spray / brush |
| Volume solids | 82 % ± 2 % |
| Density (specific gravity) | 1 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-midcoat-mio-80.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 15 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 6 h | 4 h | 2 h |
| Walk-on dry | 9 h | 6 h | 3 h |
| Recoat, minimum | 9 h | 6 h | 3 h |
| Dried/cured for service | 10 d | 7 d | 5 d |
Data taken from the manufacturer's TDS jotun-penguard-midcoat-mio-80.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38508-2020
- ISO 12944-2
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Penguard Midcoat MIO 80 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Midcoat MIO 80 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat MIO 80 and the intended use.
Penguard Midcoat MIO 80 — common questions
What service environment suits Penguard Midcoat MIO 80?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Penguard Midcoat MIO 80 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Penguard Midcoat MIO 80?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Penguard Midcoat MIO 80
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Midcoat MIO 80
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net