Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Midcoat MIO epoxy

A epoxy intermediate coat in the Jotun range, Penguard Midcoat MIO (1FS) is selected for steel structures exposed to atmospheric exposure. This model offers high solids / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Midcoat MIO.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Midcoat MIO — product overview

Penguard Midcoat MIO belongs to the epoxy system and is a two-component product used as intermediate coat; service environment atmospheric exposure; application and system notes are set out below.

Penguard Midcoat MIO — positioning

Jotun's Penguard Midcoat MIO is a epoxy intermediate coat for atmospheric exposure conditions, supplied with its technical documentation.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for high solids / high-build.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Penguard Midcoat MIO — key data

ModelPenguard Midcoat MIO
Manufacturer product name1FS
Resin systemepoxy
Componentstwo-component
Typical number of coatsintermediate coat
Service environmentatmospheric exposure
Key characteristicshigh solids / high-build
Colour rangeRed / Grey
Application methodairless spray / brush
Volume solids82 % ± 2 %
Density (specific gravity)1.8 kg/l
Flash point25 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-midcoat-mio.pdf)

Application and system notes

Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature15 °C23 °C40 °C
Touch dry6 h4 h2 h
Walk-on dry9 h6 h3 h
Recoat, minimum9 h6 h3 h
Dried/cured for service10 d7 d5 d

Data taken from the manufacturer's TDS jotun-penguard-midcoat-mio.pdf (page 3); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard Midcoat MIO — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Midcoat MIO and the intended use.

Penguard Midcoat MIO — common questions

Which substrates can Penguard Midcoat MIO be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Penguard Midcoat MIO?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Penguard Midcoat MIO have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Penguard Midcoat MIO

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Midcoat MIO

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat