Penguard Midcoat M20 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Midcoat M20 — product overview
A two-component epoxy coating, normally used as intermediate coat: key features fast-drying / high-build; used in atmospheric exposure; suitable on steel.
Penguard Midcoat M20 — positioning
Penguard Midcoat M20 (0P7) is the epoxy intermediate coat in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where fast-drying / high-build are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Penguard Midcoat M20 — key data
| Model | Penguard Midcoat M20 |
|---|---|
| Manufacturer product name | 0P7 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | intermediate coat |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying / high-build |
| Colour range | White / light yellow / light grey / mid grey / grey XO / dark grey |
| Application method | airless spray / brush |
| Volume solids | 80 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 25 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-midcoat-m20.pdf) |
Application and system notes
Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Usually applied as intermediate coat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 12944
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Penguard Midcoat M20 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Midcoat M20 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Penguard Midcoat M20, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Penguard Midcoat M20 — common questions
What are the minimum order quantity and lead time for Penguard Midcoat M20?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Penguard Midcoat M20?
This model offers fast-drying / high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Penguard Midcoat M20 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Penguard Midcoat M20
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Midcoat M20
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net