Penguard HSP MIO E epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard HSP MIO E — product overview
This is a two-component epoxy product, typically used as primer / intermediate coat. It is characterised by fast-drying / high solids / high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel / galvanised steel / stainless steel.
Penguard HSP MIO E — positioning
Jotun's Penguard HSP MIO E is a epoxy primer / intermediate coat for atmospheric exposure conditions, supplied with its technical documentation.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where fast-drying / high solids / high-build are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Penguard HSP MIO E — key data
| Model | Penguard HSP MIO E |
|---|---|
| Manufacturer product name | 0N4 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel / stainless steel |
| Key characteristics | fast-drying / high solids / high-build |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 75 % ± 2 % |
| Density (specific gravity) | 1.7 kg/l |
| Flash point | 27 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-hsp-mio-e.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 11 h | 5 h | 2 h | 1 h | 30 min |
| Walk-on dry | 18 h | 12 h | 6 h | 3 h | 2 h |
| Recoat, minimum | 18 h | 12 h | 4 h | 2 h | 1 h |
| Dried/cured for service | 21 d | 13 d | 8 d | 4 d | 3 d |
Data taken from the manufacturer's TDS jotun-penguard-hsp-mio-e.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- EN 15804
- GB 38508-2020
- ISO 14025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Penguard HSP MIO E — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Penguard HSP MIO E, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard HSP MIO E — common questions
Where can I find the technical data for Penguard HSP MIO E?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Penguard HSP MIO E take in the system?
This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Penguard HSP MIO E?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Penguard HSP MIO E
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard HSP MIO E
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net