Offshore steel structures and ship coating (heavy-duty)
Model

Penguard EXA II epoxy

Penguard EXA II (02D) is the epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers fast-drying / high solids / high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Penguard EXA II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard EXA II — product overview

A two-component epoxy coating, normally used as primer / intermediate coat / topcoat: key features fast-drying / high solids / high-build / abrasion-resistant; used in atmospheric exposure / immersion service / low-temperature application; suitable on carbon steel / galvanised steel / stainless steel / coated surfaces.

Penguard EXA II — positioning

Penguard EXA II is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service / low-temperature application service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where fast-drying / high solids / high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.

Penguard EXA II — key data

ModelPenguard EXA II
Manufacturer product name02D
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / galvanised steel / stainless steel / coated surfaces
Key characteristicsfast-drying / high solids / high-build / abrasion-resistant
Colour rangeAluminium red / Grey / White / Black
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids75 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-exa-ii.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry26 h14 h10 h6 h5 h2 h1 h
Walk-on dry96 h48 h30 h16 h10 h5 h2 h
Recoat, minimum42 h24 h18 h10 h7 h4 h2 h

Data taken from the manufacturer's TDS jotun-penguard-exa-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / coated surfaces and the corrosivity of the atmospheric exposure / immersion service / low-temperature application environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard EXA II — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Penguard EXA II, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard EXA II — common questions

What are the minimum order quantity and lead time for Penguard EXA II?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Penguard EXA II?

This model offers fast-drying / high solids / high-build / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Penguard EXA II controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Penguard EXA II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard EXA II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat