Jotun Thinner No. 7 auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotun Thinner No. 7 — product overview
This is a one-component auxiliary material product, typically used as thinner. It is characterised by manufactured to the manufacturer's technical data sheet; service environment as the system requires; suitable for protective coating of steel.
Jotun Thinner No. 7 — positioning
Jotun Thinner No. 7 belongs to the auxiliary material family of Jotun protective coatings and is used as thinner in as the system requires service.
Three things decide the system: the substrate (steel), the service environment (as the system requires) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: as the system requires.
Jotun Thinner No. 7 — key data
| Model | Jotun Thinner No. 7 |
|---|---|
| Manufacturer product name | 092 |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | thinner |
| Service environment | as the system requires |
| Colour range | Colourless |
| Application method | thin the companion coating |
| Density (specific gravity) | 0.9 kg/l |
| Flash point | 25 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-thinner-no-7.pdf) |
Application and system notes
Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Coat sequence, film thickness and quantity depend on the service conditions (steel / as the system requires) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38505-2020
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotun Thinner No. 7 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Jotun Thinner No. 7, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotun Thinner No. 7 — common questions
Which substrates can Jotun Thinner No. 7 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotun Thinner No. 7?
The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotun Thinner No. 7 have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jotun Thinner No. 7
- Jotun Thinner No. 10
- Jotun Thinner No. 11
- Jotun Thinner No. 12
- Jotun Thinner No. 16
- Jotun Thinner No. 18
- Jotun Thinner No. 19
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotun Thinner No. 7
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net