Jotun Thinner No. 29 auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotun Thinner No. 29 — product overview
one-component auxiliary material product for use as thinner; manufactured to the manufacturer's technical data sheet; substrates steel; service environment as the system requires.
Jotun Thinner No. 29 — positioning
A auxiliary material thinner in the Jotun range, Jotun Thinner No. 29 (092) is selected for steel structures exposed to as the system requires.
Three things decide the system: the substrate (steel), the service environment (as the system requires) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
It is used for protective coating work in as the system requires conditions.
Jotun Thinner No. 29 — key data
| Model | Jotun Thinner No. 29 |
|---|---|
| Manufacturer product name | 092 |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | thinner |
| Service environment | as the system requires |
| Colour range | Colourless |
| Application method | thin the companion coating |
| Density (specific gravity) | 1 kg/l |
| Flash point | 42 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-thinner-no-29.pdf) |
Application and system notes
Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 38508-2020
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotun Thinner No. 29 — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Jotun Thinner No. 29, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotun Thinner No. 29 — common questions
What service environment suits Jotun Thinner No. 29?
The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotun Thinner No. 29 have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jotun Thinner No. 29?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Jotun Thinner No. 29
- Jotun Thinner No. 10
- Jotun Thinner No. 11
- Jotun Thinner No. 12
- Jotun Thinner No. 16
- Jotun Thinner No. 18
- Jotun Thinner No. 19
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotun Thinner No. 29
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net