Offshore steel structures and ship coating (heavy-duty)
Model

Jotatop BC180 SF polyurethane

Jotatop BC180 SF (6SW) — in the Jotun range — is a polyurethane product normally used as primer where atmospheric exposure conditions apply. This model offers high solids / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotatop BC180 SF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotatop BC180 SF — product overview

Jotatop BC180 SF belongs to the polyurethane system and is a two-component product used as primer; service environment atmospheric exposure; application and system notes are set out below.

Jotatop BC180 SF — positioning

Jotun's Jotatop BC180 SF is a polyurethane primer for atmospheric exposure conditions, supplied with its technical documentation.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where high solids / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

Typical service environment: atmospheric exposure.

Jotatop BC180 SF — key data

ModelJotatop BC180 SF
Manufacturer product name6SW
Resin systempolyurethane
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Key characteristicshigh solids / abrasion-resistant
Colour rangeLimited colour range
Application methodairless spray / brush / roller
Volume solids97 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point85 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotatop-bc180-sf.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry3 h2 h1.5 h1 h
Recoat, minimum12 h6 h3 h3 h
Dried/cured for service16 d10 d7 d4 d

Data taken from the manufacturer's TDS jotun-jotatop-bc180-sf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotatop BC180 SF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Jotatop BC180 SF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotatop BC180 SF — common questions

How is the recoat interval for Jotatop BC180 SF controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jotatop BC180 SF be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotatop BC180 SF?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Jotatop BC180 SF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotatop BC180 SF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat