Hardtop WF polyurethane
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hardtop WF — product overview
Hardtop WF belongs to the polyurethane system and is a two-component product used as primer / topcoat; service environment atmospheric exposure; application and system notes are set out below.
Hardtop WF — positioning
Hardtop WF (6DX) is the polyurethane primer / topcoat in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure.
Hardtop WF — key data
| Model | Hardtop WF |
|---|---|
| Manufacturer product name | 6DX |
| Resin system | polyurethane |
| Components | two-component |
| Typical number of coats | primer / topcoat |
| Service environment | atmospheric exposure |
| Key characteristics | chemical-resistant |
| Colour range | A range of colours (colour card on request) |
| Application method | airless spray / brush / roller |
| Volume solids | 52 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 101 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-hardtop-wf.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 35 °C |
|---|---|---|---|
| Touch dry | 2 h | 75 min | 30 min |
| Walk-on dry | 18 h | 9 h | 3 h |
| Recoat, minimum | 18 h | 9 h | 3 h |
Data taken from the manufacturer's TDS jotun-hardtop-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-2
- ISO 2813
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Hardtop WF — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Hardtop WF, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Hardtop WF — common questions
How many components does Hardtop WF have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Hardtop WF?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Hardtop WF take in the system?
This model is typically used as primer / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Hardtop WF
- Hardtop E99 WF
- Hardtop E99 WF HG
- Hardtop Express WFL
- Hardtop M WF
- Hardtop Metallic Uni WF
- Jotatop LEP Tiecoat
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hardtop WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net