Jotapipe FC 407 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotapipe FC 407 — product overview
A two-component epoxy coating, normally used as single-coat system / lining: key features high solids; used in atmospheric exposure; suitable on steel.
Jotapipe FC 407 — positioning
Jotapipe FC 407 is a epoxy single-coat system / lining from the Jotun range, formulated for steel structures in atmospheric exposure.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where high solids are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure conditions.
Jotapipe FC 407 — key data
| Model | Jotapipe FC 407 |
|---|---|
| Manufacturer product name | 0J5 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | single-coat system / lining |
| Service environment | atmospheric exposure |
| Key characteristics | high solids |
| Colour range | Red |
| Application method | airless spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 74 % ± 2 % |
| Density (specific gravity) | 1.38 kg/l |
| Flash point | 37 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotapipe-fc-407.pdf) |
Application and system notes
Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 12 h | 7 h | 1.5 h |
| Dried/cured for service | 9 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-jotapipe-fc-407.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38505-2020
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8503-2
Standards and approvals for Jotapipe FC 407 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotapipe FC 407 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Jotapipe FC 407, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotapipe FC 407 — common questions
Which substrates can Jotapipe FC 407 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotapipe FC 407?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotapipe FC 407 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jotapipe FC 407
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotapipe FC 407
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net