Offshore steel structures and ship coating (heavy-duty)
Model

Jotapipe IL 410 epoxy

Jotun's Jotapipe IL 410 is a epoxy single-coat system for atmospheric exposure conditions, supplied with its technical documentation. This model offers potable water tanks. For the complete technical data, request the manufacturer's TDS and SDS for Jotapipe IL 410.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotapipe IL 410 — product overview

Jotapipe IL 410 belongs to the epoxy system and is a two-component product used as single-coat system; service environment atmospheric exposure; application and system notes are set out below.

Jotapipe IL 410 — positioning

Jotapipe IL 410 (0WS) — in the Jotun range — is a epoxy product normally used as single-coat system where atmospheric exposure conditions apply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for potable water tanks.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Jotapipe IL 410 — key data

ModelJotapipe IL 410
Manufacturer product name0WS
Resin systemepoxy
Componentstwo-component
Typical number of coatssingle-coat system
Service environmentatmospheric exposure
Key characteristicspotable water tanks
Colour rangeGrey
Application methodairless spray
Surface preparation gradesa 2½
Volume solids100 %
Density (specific gravity)1,3 kg/l
Flash point100 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotapipe-il-410.pdf)

Application and system notes

Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry15 h10 h3 h
Dried/cured for service14 d7 d4 d

Data taken from the manufacturer's TDS jotun-jotapipe-il-410.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as single-coat system; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotapipe IL 410 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Jotapipe IL 410, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotapipe IL 410 — common questions

Which substrates can Jotapipe IL 410 be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotapipe IL 410?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotapipe IL 410 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Jotapipe IL 410

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotapipe IL 410

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat