Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic Smart Pack Alu modified epoxy

Jotamastic Smart Pack Alu (0SRALU) — in the Jotun range — is a modified epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service conditions apply. This model offers high solids / surface-tolerant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic Smart Pack Alu.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic Smart Pack Alu — product overview

This is a two-component modified epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by high solids / surface-tolerant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / stainless steel / concrete / coated surfaces.

Jotamastic Smart Pack Alu — positioning

Jotun's Jotamastic Smart Pack Alu is a modified epoxy primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation.

Three things decide the system: the substrate (carbon steel / stainless steel / concrete / coated surfaces), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

Where high solids / surface-tolerant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Jotamastic Smart Pack Alu — key data

ModelJotamastic Smart Pack Alu
Manufacturer product name0SRALU
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / stainless steel / concrete / coated surfaces
Key characteristicshigh solids / surface-tolerant
Colour rangeAluminium red
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids72 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point33 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-smart-pack-alu.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Walk-on dry45 h20 h14 h7 h3 h
Recoat, minimum45 h20 h14 h7 h3 h
Dried/cured for service21 d14 d10 d7 d3 d

Data taken from the manufacturer's TDS jotun-jotamastic-smart-pack-alu.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / stainless steel / concrete / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Jotamastic Smart Pack Alu follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotamastic Smart Pack Alu — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Jotamastic Smart Pack Alu, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotamastic Smart Pack Alu — common questions

Where can I find the technical data for Jotamastic Smart Pack Alu?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotamastic Smart Pack Alu take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotamastic Smart Pack Alu?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Jotamastic Smart Pack Alu

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic Smart Pack Alu

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat