Jotamastic SF Alu modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotamastic SF Alu — product overview
A two-component modified epoxy coating, normally used as primer / intermediate coat / topcoat: key features high-build / surface-tolerant / abrasion-resistant; used in atmospheric exposure / immersion service; suitable on carbon steel / coated surfaces.
Jotamastic SF Alu — positioning
Jotamastic SF Alu (0JK) is the modified epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is carbon steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
Typical service environment: atmospheric exposure / immersion service.
Jotamastic SF Alu — key data
| Model | Jotamastic SF Alu |
|---|---|
| Manufacturer product name | 0JK |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / coated surfaces |
| Key characteristics | high-build / surface-tolerant / abrasion-resistant |
| Colour range | Aluminium red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2 / st 2 |
| Volume solids | 99 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 95 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotamastic-sf-alu.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / coated surfaces and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- FDA Title 21
- ISO 12944-4
- ISO 2813
- ISO 3679
- ISO 8501-1
- PSPC
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotamastic SF Alu — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic SF Alu and the intended use.
Jotamastic SF Alu — common questions
What are the minimum order quantity and lead time for Jotamastic SF Alu?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Jotamastic SF Alu?
This model offers high-build / surface-tolerant / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Jotamastic SF Alu controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Jotamastic SF Alu
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotamastic SF Alu
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net