Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic SF Alu modified epoxy

Jotamastic SF Alu is the modified epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. This model offers high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic SF Alu.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic SF Alu — product overview

A two-component modified epoxy coating, normally used as primer / intermediate coat / topcoat: key features high-build / surface-tolerant / abrasion-resistant; used in atmospheric exposure / immersion service; suitable on carbon steel / coated surfaces.

Jotamastic SF Alu — positioning

Jotamastic SF Alu (0JK) is the modified epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is carbon steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure / immersion service.

Jotamastic SF Alu — key data

ModelJotamastic SF Alu
Manufacturer product name0JK
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh-build / surface-tolerant / abrasion-resistant
Colour rangeAluminium red
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids99 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point95 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-sf-alu.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / coated surfaces and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotamastic SF Alu — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotamastic SF Alu and the intended use.

Jotamastic SF Alu — common questions

What are the minimum order quantity and lead time for Jotamastic SF Alu?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotamastic SF Alu?

This model offers high-build / surface-tolerant / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jotamastic SF Alu controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Jotamastic SF Alu

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic SF Alu

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat