Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic SF modified epoxy

Jotamastic SF belongs to the modified epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service. This model offers high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic SF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic SF — product overview

A two-component modified epoxy coating, normally used as primer / intermediate coat / topcoat: key features high-build / surface-tolerant / abrasion-resistant; used in atmospheric exposure / immersion service; suitable on carbon steel / coated surfaces.

Jotamastic SF — positioning

A modified epoxy primer / intermediate coat / topcoat in the Jotun range, Jotamastic SF (0JK) is selected for steel structures exposed to atmospheric exposure / immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Jotamastic SF — key data

ModelJotamastic SF
Manufacturer product name0JK
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh-build / surface-tolerant / abrasion-resistant
Colour rangeGrey / White / Red
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids99 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point95 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-sf.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / coated surfaces / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Jotamastic SF — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Jotamastic SF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotamastic SF — common questions

What are the minimum order quantity and lead time for Jotamastic SF?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotamastic SF?

This model offers high-build / surface-tolerant / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jotamastic SF controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Jotamastic SF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic SF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat