Jotamastic 90 Aluminium modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotamastic 90 Aluminium — product overview
two-component modified epoxy product for use as primer / intermediate coat / topcoat; high solids / high-build / surface-tolerant / abrasion-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete / coated surfaces; service environment atmospheric exposure / immersion service / low-temperature application.
Jotamastic 90 Aluminium — positioning
Jotamastic 90 Aluminium is the modified epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service / low-temperature application service.
Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel / concrete / coated surfaces), the service environment (atmospheric exposure / immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.
Where high solids / high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.
Jotamastic 90 Aluminium — key data
| Model | Jotamastic 90 Aluminium |
|---|---|
| Manufacturer product name | 0D5 |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete / coated surfaces |
| Key characteristics | high solids / high-build / surface-tolerant / abrasion-resistant |
| Colour range | Aluminium red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2 / st 2 |
| Volume solids | 80 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotamastic-90-aluminium.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / concrete / coated surfaces / atmospheric exposure / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- IMO 2010 FTP
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotamastic 90 Aluminium — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Jotamastic 90 Aluminium, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotamastic 90 Aluminium — common questions
Which substrates can Jotamastic 90 Aluminium be used on?
The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotamastic 90 Aluminium?
The service environment for this model is atmospheric exposure / immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotamastic 90 Aluminium have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jotamastic 90 Aluminium
- Balloxy BT
- Balloxy HB Light
- Jotamastic 80 Aluminium
- Jotamastic 80 MIO
- Jotamastic 87
- Jotamastic 87 Aluminium
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotamastic 90 Aluminium
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net