Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 87 modified epoxy

Jotamastic 87 is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service / low-temperature application. This model offers high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 87.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 87 — product overview

This is a two-component modified epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by high solids / high-build / surface-tolerant / abrasion-resistant; service environment atmospheric exposure / immersion service / low-temperature application; suitable for protective coating of carbon steel / coated surfaces.

Jotamastic 87 — positioning

Jotamastic 87 is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service / low-temperature application.

Three things decide the system: the substrate (carbon steel / coated surfaces), the service environment (atmospheric exposure / immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

The model is notable for high solids / high-build / surface-tolerant / abrasion-resistant.

Typical service environment: atmospheric exposure / immersion service / low-temperature application.

Jotamastic 87 — key data

ModelJotamastic 87
Manufacturer product name332
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service / low-temperature application
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2 / st 2
Volume solids82 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-87.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Jotamastic 87 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotamastic 87 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Jotamastic 87, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotamastic 87 — common questions

What are the minimum order quantity and lead time for Jotamastic 87?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Jotamastic 87?

This model offers high solids / high-build / surface-tolerant / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jotamastic 87 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Models related to Jotamastic 87

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 87

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat