Offshore steel structures and ship coating (heavy-duty)
Model

Jotamastic 87 GF modified epoxy

Jotamastic 87 GF is a modified epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in atmospheric exposure / immersion service. This model offers high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotamastic 87 GF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotamastic 87 GF — product overview

This is a two-component modified epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by high solids / high-build / surface-tolerant / abrasion-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / coated surfaces.

Jotamastic 87 GF — positioning

Jotun's Jotamastic 87 GF is a modified epoxy primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation.

The substrate for this product is carbon steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high solids / high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.

Jotamastic 87 GF — key data

ModelJotamastic 87 GF
Manufacturer product name336
Resin systemmodified epoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / coated surfaces
Key characteristicshigh solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2 / st 2
Volume solids80 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point35 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotamastic-87-gf.pdf)

Application and system notes

Application: airless spray / brush (sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / coated surfaces / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jotamastic 87 GF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotamastic 87 GF — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Jotamastic 87 GF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotamastic 87 GF — common questions

What service environment suits Jotamastic 87 GF?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Jotamastic 87 GF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Jotamastic 87 GF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Jotamastic 87 GF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotamastic 87 GF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat