Offshore steel structures and ship coating (heavy-duty)
Model

Jotacote B10 epoxy

Jotacote B10 is a epoxy primer / intermediate coat / topcoat from the Jotun range, formulated for steel structures in immersion service / low-temperature application. This model offers fast-drying / high-build / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Jotacote B10.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotacote B10 — product overview

two-component epoxy product for use as primer / intermediate coat / topcoat; fast-drying / high-build / abrasion-resistant; substrates carbon steel / galvanised steel; service environment immersion service / low-temperature application.

Jotacote B10 — positioning

Jotacote B10 is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for immersion service / low-temperature application service.

Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

Where fast-drying / high-build / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Service environments include immersion service / low-temperature application; send the actual conditions for anything outside that range.

Jotacote B10 — key data

ModelJotacote B10
Manufacturer product name0AY
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentimmersion service / low-temperature application
Suitable substratescarbon steel / galvanised steel
Key characteristicsfast-drying / high-build / abrasion-resistant
Colour rangeAluminium red / Grey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids72 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point32 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotacote-b10.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Jotacote B10 — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Jotacote B10, send a request at the foot of this page, or contact us on WhatsApp or by email.

Jotacote B10 — common questions

How is the recoat interval for Jotacote B10 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jotacote B10 be used on?

The TDS lists the substrate as carbon steel / galvanised steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Jotacote B10?

The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Jotacote B10

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotacote B10

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat