Jotachar JF750 epoxy passive fire protection
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotachar JF750 — product overview
A two-component epoxy passive fire protection coating, normally used as primer / intermediate coat / fire protection coating: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel / galvanised steel / stainless steel.
Jotachar JF750 — positioning
Jotachar JF750 (0F8) — in the Jotun range — is a epoxy passive fire protection product normally used as primer / intermediate coat / fire protection coating where atmospheric exposure conditions apply.
Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Jotachar JF750 — key data
| Model | Jotachar JF750 |
|---|---|
| Manufacturer product name | 0F8 |
| Resin system | epoxy passive fire protection |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / fire protection coating |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel / stainless steel |
| Colour range | Grey |
| Application method | airless spray / roller |
| Volume solids | 100 % |
| Flash point | 100 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotachar-jf750.pdf) |
Application and system notes
Application: airless spray / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 15 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 6 h | 3 h | 1 h | 1 h |
| Walk-on dry | 24 h | 12 h | 6 h | 3 h |
| Recoat, minimum | 6 h | 3 h | 2 h | 1 h |
| Dried/cured for service | 24 h | 12 h | 6 h | 3 h |
Data taken from the manufacturer's TDS jotun-jotachar-jf750.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / fire protection coating; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 14907
- GB 30981.2
- GB 30981.2-2025
- ISO 1183
- ISO 20088-1
- ISO 20340
- ISO 22899-1
- ISO 3233
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotachar JF750 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Jotachar JF750, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotachar JF750 — common questions
What service environment suits Jotachar JF750?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotachar JF750 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jotachar JF750?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Jotachar JF750
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotachar JF750
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net