Offshore steel structures and ship coating (heavy-duty)
Model

Jotachar JF750 XT epoxy passive fire protection

Jotachar JF750 XT is a epoxy passive fire protection primer / intermediate coat from the Jotun range, formulated for steel structures in atmospheric exposure. For the complete technical data, request the manufacturer's TDS and SDS for Jotachar JF750 XT.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotachar JF750 XT — product overview

Jotachar JF750 XT belongs to the epoxy passive fire protection system and is a two-component product used as primer / intermediate coat; service environment atmospheric exposure; application and system notes are set out below.

Jotachar JF750 XT — positioning

Jotachar JF750 XT is the epoxy passive fire protection primer / intermediate coat in Jotun's protective coatings line, specified for atmospheric exposure service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Jotachar JF750 XT — key data

ModelJotachar JF750 XT
Manufacturer product name
Resin systemepoxy passive fire protection
Componentstwo-component
Typical number of coatsprimer / intermediate coat
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Colour rangeGrey
Application methodairless spray / roller
Volume solids100 %
Flash point100 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotachar-jf750-xt.pdf)

Application and system notes

Application: airless spray / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C15 °C23 °C40 °C
Touch dry8 h6 h4 h3 h
Walk-on dry48 h17 h12 h5 h
Recoat, minimum8 h5 h3 h2 h
Dried/cured for service48 h24 h16 h12 h

Data taken from the manufacturer's TDS jotun-jotachar-jf750-xt.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Jotachar JF750 XT follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotachar JF750 XT — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Jotachar JF750 XT, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Jotachar JF750 XT — common questions

Where can I find the technical data for Jotachar JF750 XT?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotachar JF750 XT take in the system?

This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotachar JF750 XT?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Jotachar JF750 XT

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotachar JF750 XT

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat