Jota Armour II epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jota Armour II — product overview
Jota Armour II belongs to the epoxy system and is a three-component product used as primer; service environment atmospheric exposure; application and system notes are set out below.
Jota Armour II — positioning
Jota Armour II belongs to the epoxy family of Jotun protective coatings and is used as primer in atmospheric exposure service.
The substrate for this product is concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Where abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Jota Armour II — key data
| Model | Jota Armour II |
|---|---|
| Manufacturer product name | |
| Resin system | epoxy |
| Components | three-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | concrete |
| Key characteristics | abrasion-resistant |
| Colour range | Grey 038 / green 137 / BS 640 |
| Application method | airless spray / brush / roller |
| Volume solids | 90 % ± 2 % |
| Density (specific gravity) | 2.5 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jota-armour-ii.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Coat sequence, film thickness and quantity depend on the service conditions (concrete / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- Norsok M-501
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jota Armour II — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Jota Armour II, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jota Armour II — common questions
Where can I find the technical data for Jota Armour II?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Jota Armour II take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Jota Armour II?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Jota Armour II
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jota Armour II
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net