Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop XP II WB polyurethane

Hardtop XP II WB () is the polyurethane primer in the Jotun range; this page sets out its system position, parameters and supply. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop XP II WB.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop XP II WB — product overview

This is a two-component polyurethane product, typically used as primer. It is characterised by chemical-resistant; service environment atmospheric exposure; suitable for protective coating of steel.

Hardtop XP II WB — positioning

Hardtop XP II WB belongs to the polyurethane family of Jotun protective coatings and is used as primer in atmospheric exposure service.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Hardtop XP II WB — key data

ModelHardtop XP II WB
Manufacturer product name
Resin systempolyurethane
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Key characteristicschemical-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Volume solids48 % ± 2 %
Density (specific gravity)1.35 kg/l
Flash point101 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-xp-ii-wb.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C35 °C
Touch dry1.5 h40 min20 min
Walk-on dry12 h6 h3 h
Recoat, minimum12 h6 h3 h

Data taken from the manufacturer's TDS jotun-hardtop-xp-ii-wb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Hardtop XP II WB — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Hardtop XP II WB, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Hardtop XP II WB — common questions

What service environment suits Hardtop XP II WB?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Hardtop XP II WB have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Hardtop XP II WB?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Hardtop XP II WB

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop XP II WB

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat