Offshore steel structures and ship coating (heavy-duty)
Model

Hardtop M WF polyurethane

Hardtop M WF (6JY) is the polyurethane primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Hardtop M WF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Hardtop M WF — product overview

two-component polyurethane product for use as primer / intermediate coat / topcoat; chemical-resistant; substrates steel; service environment atmospheric exposure.

Hardtop M WF — positioning

Hardtop M WF is the polyurethane primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure service.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where chemical-resistant are specified, it combines with other products of the same system into a complete scheme.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Hardtop M WF — key data

ModelHardtop M WF
Manufacturer product name6JY
Resin systempolyurethane
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure
Key characteristicschemical-resistant
Colour rangeTo the manufacturer colour card
Application methodbrush / roller
Volume solids51 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point101 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-hardtop-m-wf.pdf)

Application and system notes

Application: brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C35 °C
Touch dry1.5 h40 min20 min
Walk-on dry12 h7 h2 h
Recoat, minimum12 h7 h2 h

Data taken from the manufacturer's TDS jotun-hardtop-m-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Hardtop M WF — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Hardtop M WF, send a request at the foot of this page, or contact us on WhatsApp or by email.

Hardtop M WF — common questions

Where can I find the technical data for Hardtop M WF?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Hardtop M WF take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Hardtop M WF?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Hardtop M WF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Hardtop M WF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat