Balloxy HB Light modified epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Balloxy HB Light — product overview
two-component modified epoxy product for use as primer / intermediate coat / topcoat; high solids / high-build / surface-tolerant / ballast tanks; substrates carbon steel / galvanised steel / stainless steel / coated surfaces; service environment atmospheric exposure / immersion service / low-temperature application.
Balloxy HB Light — positioning
Balloxy HB Light belongs to the modified epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service / low-temperature application service.
The substrate for this product is carbon steel / galvanised steel / stainless steel / coated surfaces. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where high solids / high-build / surface-tolerant / ballast tanks matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service / low-temperature application conditions.
Balloxy HB Light — key data
| Model | Balloxy HB Light |
|---|---|
| Manufacturer product name | 0BR |
| Resin system | modified epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service / low-temperature application |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / coated surfaces |
| Key characteristics | high solids / high-build / surface-tolerant / ballast tanks |
| Colour range | Beige / green |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 82 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 35 °C |
| Gloss | Semi-gloss (35-70) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-balloxy-hb-light.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / coated surfaces), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 38508-2020
- IMO Res.215(82)
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- PSPC
Standards and approvals for Balloxy HB Light follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Balloxy HB Light — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Balloxy HB Light, send a request at the foot of this page, or contact us on WhatsApp or by email.
Balloxy HB Light — common questions
What are the key characteristics of Balloxy HB Light?
This model offers high solids / high-build / surface-tolerant / ballast tanks. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Balloxy HB Light controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Balloxy HB Light be used on?
The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Balloxy HB Light
- Balloxy BT
- Jotamastic 80 Aluminium
- Jotamastic 80 MIO
- Jotamastic 87
- Jotamastic 87 Aluminium
- Jotamastic 90
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Balloxy HB Light
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net