Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard Holding Primer temporary protective material

Tankguard Holding Primer () — in the Jotun range — is a temporary protective material product normally used as rust prevention (temporary protection) where atmospheric exposure conditions apply. This model offers chemical-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard Holding Primer.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard Holding Primer — product overview

one-component temporary protective material product for use as rust prevention (temporary protection); chemical-resistant; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure.

Tankguard Holding Primer — positioning

Tankguard Holding Primer () — in the Jotun range — is a temporary protective material product normally used as rust prevention (temporary protection) where atmospheric exposure conditions apply.

The substrate for this product is carbon steel / galvanised steel / stainless steel / concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where chemical-resistant matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Tankguard Holding Primer — key data

ModelTankguard Holding Primer
Manufacturer product name
Resin systemtemporary protective material
Componentsone-component
Typical number of coatsrust prevention (temporary protection)
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicschemical-resistant
Colour rangeTo the manufacturer colour card
Application methodspray or brush
Surface preparation gradesa 2½
Volume solids43 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point28 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-holding-primer.pdf)

Application and system notes

Application: spray or brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Tankguard Holding Primer — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

For the full technical data on Tankguard Holding Primer, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Tankguard Holding Primer — common questions

How is the recoat interval for Tankguard Holding Primer controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Tankguard Holding Primer be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Tankguard Holding Primer?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Tankguard Holding Primer

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard Holding Primer

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat