Tankguard DW epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard DW — product overview
two-component epoxy product for use as primer / topcoat; potable water tanks; substrates carbon steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.
Tankguard DW — positioning
A epoxy primer / topcoat in the Jotun range, Tankguard DW (0LW) is selected for steel structures exposed to atmospheric exposure / immersion service.
Three things decide the system: the substrate (carbon steel / stainless steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.
The model is notable for potable water tanks.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Tankguard DW — key data
| Model | Tankguard DW |
|---|---|
| Manufacturer product name | 0LW |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / stainless steel / concrete |
| Key characteristics | potable water tanks |
| Colour range | Light grey / White |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 100 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 100 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-dw.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 15 h | 10 h | 3 h |
| Walk-on dry | 25 h | 13 h | 5 h |
| Recoat, minimum | 25 h | 13 h | 5 h |
Data taken from the manufacturer's TDS jotun-tankguard-dw.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- FDA Title 21, Part 175.300,
- GB 30981-2020
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- NACE No. 6
Standards and approvals for Tankguard DW follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Tankguard DW — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Tankguard DW, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Tankguard DW — common questions
What are the key characteristics of Tankguard DW?
This model offers potable water tanks. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Tankguard DW controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Tankguard DW be used on?
The TDS lists the substrate as carbon steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Tankguard DW
- Jotacote HF002
- Jotacote UHB
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard DW
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net