Offshore steel structures and ship coating (heavy-duty)
Model

Tankguard 412 epoxy

Tankguard 412 (0UH) — in the Jotun range — is a epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / immersion service conditions apply. This model offers chemical-resistant / potable water tanks. For the complete technical data, request the manufacturer's TDS and SDS for Tankguard 412.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Tankguard 412 — product overview

two-component epoxy product for use as primer / intermediate coat / topcoat; chemical-resistant / potable water tanks; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.

Tankguard 412 — positioning

A epoxy primer / intermediate coat / topcoat in the Jotun range, Tankguard 412 (0UH) is selected for steel structures exposed to atmospheric exposure / immersion service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where chemical-resistant / potable water tanks matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure / immersion service conditions.

Tankguard 412 — key data

ModelTankguard 412
Manufacturer product name0UH
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicschemical-resistant / potable water tanks
Colour rangeBlack / Green / Red / White / Light grey
Application methodairless spray / brush
Surface preparation gradesa 2½
Volume solids98 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point100 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-tankguard-412.pdf)

Application and system notes

Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry15 h6 h1.5 h
Walk-on dry30 h12 h4 h
Recoat, minimum30 h12 h4 h
Dried/cured for service15 d7 d4 d

Data taken from the manufacturer's TDS jotun-tankguard-412.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / concrete and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Tankguard 412 — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Tankguard 412, send a request at the foot of this page, or contact us on WhatsApp or by email.

Tankguard 412 — common questions

Which substrates can Tankguard 412 be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Tankguard 412?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Tankguard 412 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Tankguard 412

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Tankguard 412

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat