Hydrolysing self-polishing antifouling SPL acrylic
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Hydrolysing self-polishing antifouling SPL — product overview
This is a one-component acrylic product, typically used as topcoat / antifouling. It is characterised by manufactured to the manufacturer's technical data sheet; service environment immersion service / low-temperature application; suitable for protective coating of steel.
Hydrolysing self-polishing antifouling SPL — positioning
Hydrolysing self-polishing antifouling SPL () is the acrylic topcoat / antifouling in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
It is used for protective coating work in immersion service / low-temperature application conditions.
Hydrolysing self-polishing antifouling SPL — key data
| Model | Hydrolysing self-polishing antifouling SPL |
|---|---|
| Manufacturer product name | |
| Resin system | acrylic |
| Components | one-component |
| Typical number of coats | topcoat / antifouling |
| Service environment | immersion service / low-temperature application |
| Colour range | White |
| Application method | brush / roller |
| Volume solids | 55 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 28 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seaforce-spl.pdf) |
Application and system notes
Application: brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 5 h | 2 h | 1 h | 45 min | 30 min | 30 min |
| Recoat, minimum | 48 h | 36 h | 12 h | 9 h | 7 h | 6 h |
Data taken from the manufacturer's TDS jotun-seaforce-spl.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (steel / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 38508-2020
- ISO 3233
- ISO 3679
Standards and approvals for Hydrolysing self-polishing antifouling SPL follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Hydrolysing self-polishing antifouling SPL — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Hydrolysing self-polishing antifouling SPL, send a request at the foot of this page, or contact us on WhatsApp or by email.
Hydrolysing self-polishing antifouling SPL — common questions
Which substrates can Hydrolysing self-polishing antifouling SPL be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Hydrolysing self-polishing antifouling SPL?
The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Hydrolysing self-polishing antifouling SPL have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Hydrolysing self-polishing antifouling SPL
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Hydrolysing self-polishing antifouling SPL
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net