Offshore steel structures and ship coating (heavy-duty)
Model

Solvalitt 600 silicone acrylic

Solvalitt 600 is a silicone acrylic primer from the Jotun range, formulated for steel structures in atmospheric exposure / high temperature. For the complete technical data, request the manufacturer's TDS and SDS for Solvalitt 600.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Solvalitt 600 — product overview

This is a one-component silicone acrylic product, typically used as primer. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure / high temperature; suitable for protective coating of carbon steel / stainless steel.

Solvalitt 600 — positioning

Solvalitt 600 (6NR) — in the Jotun range — is a silicone acrylic product normally used as primer where atmospheric exposure / high temperature conditions apply.

Three things decide the system: the substrate (carbon steel / stainless steel), the service environment (atmospheric exposure / high temperature) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include atmospheric exposure / high temperature; send the actual conditions for anything outside that range.

Solvalitt 600 — key data

ModelSolvalitt 600
Manufacturer product name6NR
Resin systemsilicone acrylic
Componentsone-component
Typical number of coatsprimer
Service environmentatmospheric exposure / high temperature
Suitable substratescarbon steel / stainless steel
Colour rangeTo the manufacturer colour card
Application methodairless spray / brush / roller
Surface preparation gradesa 2½
Volume solids55 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point27 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-solvalitt-600.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h45 min30 min15 min
Walk-on dry4 h3 h2 h1.5 h
Recoat, minimum8 h5 h4 h3 h

Data taken from the manufacturer's TDS jotun-solvalitt-600.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure / high temperature environment.

Standards and approvals

Standards and approvals for Solvalitt 600 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Solvalitt 600 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Solvalitt 600, send a request at the foot of this page, or contact us on WhatsApp or by email.

Solvalitt 600 — common questions

How is the recoat interval for Solvalitt 600 controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Solvalitt 600 be used on?

The TDS lists the substrate as carbon steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Solvalitt 600?

The service environment for this model is atmospheric exposure / high temperature. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Solvalitt 600

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Solvalitt 600

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat