Offshore steel structures and ship coating (heavy-duty)
Model

SeaQuantum Plus III acrylic

A acrylic topcoat / antifouling in the Jotun range, SeaQuantum Plus III (6GL) is selected for steel structures exposed to immersion service / low-temperature application. For the complete technical data, request the manufacturer's TDS and SDS for SeaQuantum Plus III.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaQuantum Plus III — product overview

one-component acrylic product for use as topcoat / antifouling; manufactured to the manufacturer's technical data sheet; substrates steel; service environment immersion service / low-temperature application.

SeaQuantum Plus III — positioning

SeaQuantum Plus III belongs to the acrylic family of Jotun protective coatings and is used as topcoat / antifouling in immersion service / low-temperature application service.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

It is used for protective coating work in immersion service / low-temperature application conditions.

SeaQuantum Plus III — key data

ModelSeaQuantum Plus III
Manufacturer product name6GL
Resin systemacrylic
Componentsone-component
Typical number of coatstopcoat / antifouling
Service environmentimmersion service / low-temperature application
Colour rangeDark red / light red
Application methodairless spray / brush / roller
Volume solids54 % ± 2 %
Density (specific gravity)1.9 kg/l
Flash point25 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaquantum-plus-iii.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C10 °C23 °C40 °C
Touch dry5 h2 h45 min30 min30 min
Recoat, minimum24 h16 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaquantum-plus-iii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

SeaQuantum Plus III — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model SeaQuantum Plus III and the intended use.

SeaQuantum Plus III — common questions

Which substrates can SeaQuantum Plus III be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits SeaQuantum Plus III?

The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does SeaQuantum Plus III have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to SeaQuantum Plus III

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaQuantum Plus III

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat