SeaQuantum Classic III acrylic
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
SeaQuantum Classic III — product overview
one-component acrylic product for use as topcoat / antifouling; manufactured to the manufacturer's technical data sheet; substrates steel; service environment immersion service / low-temperature application.
SeaQuantum Classic III — positioning
SeaQuantum Classic III is the acrylic topcoat / antifouling in Jotun's protective coatings line, specified for immersion service / low-temperature application service.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
It is used for protective coating work in immersion service / low-temperature application conditions.
SeaQuantum Classic III — key data
| Model | SeaQuantum Classic III |
|---|---|
| Manufacturer product name | 6GN |
| Resin system | acrylic |
| Components | one-component |
| Typical number of coats | topcoat / antifouling |
| Service environment | immersion service / low-temperature application |
| Colour range | Dark red / light red |
| Application method | airless spray / brush / roller |
| Volume solids | 54 % ± 2 % |
| Density (specific gravity) | 1.8 kg/l |
| Flash point | 25 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seaquantum-classic-iii.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 5 h | 2 h | 45 min | 30 min | 30 min |
| Recoat, minimum | 24 h | 16 h | 9 h | 7 h | 6 h |
Data taken from the manufacturer's TDS jotun-seaquantum-classic-iii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as topcoat / antifouling; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the immersion service / low-temperature application environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
Standards and approvals for SeaQuantum Classic III follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
SeaQuantum Classic III — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on SeaQuantum Classic III, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
SeaQuantum Classic III — common questions
What service environment suits SeaQuantum Classic III?
The service environment for this model is immersion service / low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does SeaQuantum Classic III have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for SeaQuantum Classic III?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to SeaQuantum Classic III
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for SeaQuantum Classic III
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net