Seamate NB acrylic
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Seamate NB — product overview
A one-component acrylic coating, normally used as primer / intermediate coat / antifouling: key features manufactured to the manufacturer's technical data sheet; used in immersion service; suitable on carbon steel.
Seamate NB — positioning
Seamate NB is the acrylic primer / intermediate coat / antifouling in Jotun's protective coatings line, specified for immersion service service.
The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: immersion service.
Seamate NB — key data
| Model | Seamate NB |
|---|---|
| Manufacturer product name | 0WL |
| Resin system | acrylic |
| Components | one-component |
| Typical number of coats | primer / intermediate coat / antifouling |
| Service environment | immersion service |
| Suitable substrates | carbon steel |
| Colour range | Dark red / light red |
| Application method | airless spray / brush / roller |
| Volume solids | 58 % ± 2 % |
| Density (specific gravity) | 1.7 kg/l |
| Flash point | 25 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seamate-nb.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 5 h | 2 h | 45 min | 30 min | 30 min |
| Recoat, minimum | 24 h | 16 h | 9 h | 7 h | 6 h |
Data taken from the manufacturer's TDS jotun-seamate-nb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / antifouling; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the immersion service environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 3233
- ISO 3679
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Seamate NB — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Seamate NB, send a request at the foot of this page, or contact us on WhatsApp or by email.
Seamate NB — common questions
What service environment suits Seamate NB?
The service environment for this model is immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Seamate NB have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Seamate NB?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Seamate NB
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Seamate NB
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net