Offshore steel structures and ship coating (heavy-duty)
Model

SeaForce Active acrylic

A acrylic primer / intermediate coat / topcoat / antifouling in the Jotun range, SeaForce Active (08R) is selected for steel structures exposed to immersion service / low-temperature application. For the complete technical data, request the manufacturer's TDS and SDS for SeaForce Active.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaForce Active — product overview

SeaForce Active belongs to the acrylic system and is a one-component product used as primer / intermediate coat / topcoat / antifouling; service environment immersion service / low-temperature application; application and system notes are set out below.

SeaForce Active — positioning

SeaForce Active is the acrylic primer / intermediate coat / topcoat / antifouling in Jotun's protective coatings line, specified for immersion service / low-temperature application service.

Three things decide the system: the substrate (carbon steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: immersion service / low-temperature application.

SeaForce Active — key data

ModelSeaForce Active
Manufacturer product name08R
Resin systemacrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat / topcoat / antifouling
Service environmentimmersion service / low-temperature application
Suitable substratescarbon steel
Colour rangeDark red / light red / Black / Blue
Application methodairless spray / brush / roller
Volume solids59 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point28 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaforce-active.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C5 °C10 °C23 °C40 °C
Touch dry5 h2 h1 h45 min30 min30 min
Recoat, minimum48 h36 h12 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaforce-active.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

SeaForce Active — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for SeaForce Active, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaForce Active — common questions

How many components does SeaForce Active have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for SeaForce Active?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does SeaForce Active take in the system?

This model is typically used as primer / intermediate coat / topcoat / antifouling. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to SeaForce Active

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaForce Active

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat