Offshore steel structures and ship coating (heavy-duty)
Model

SeaForce Active Plus acrylic

Jotun's SeaForce Active Plus is a acrylic intermediate coat / topcoat / antifouling for immersion service / low-temperature application conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for SeaForce Active Plus.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaForce Active Plus — product overview

This is a one-component acrylic product, typically used as intermediate coat / topcoat / antifouling. It is characterised by manufactured to the manufacturer's technical data sheet; service environment immersion service / low-temperature application; suitable for protective coating of carbon steel.

SeaForce Active Plus — positioning

SeaForce Active Plus belongs to the acrylic family of Jotun protective coatings and is used as intermediate coat / topcoat / antifouling in immersion service / low-temperature application service.

Three things decide the system: the substrate (carbon steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include immersion service / low-temperature application; send the actual conditions for anything outside that range.

SeaForce Active Plus — key data

ModelSeaForce Active Plus
Manufacturer product name08T
Resin systemacrylic
Componentsone-component
Typical number of coatsintermediate coat / topcoat / antifouling
Service environmentimmersion service / low-temperature application
Suitable substratescarbon steel
Colour rangeDark red / light red
Application methodairless spray / brush / roller
Volume solids58 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point28 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaforce-active-plus.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C5 °C10 °C23 °C40 °C
Touch dry5 h2 h1 h45 min30 min30 min
Recoat, minimum48 h36 h12 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaforce-active-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / immersion service / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for SeaForce Active Plus follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

SeaForce Active Plus — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for SeaForce Active Plus, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaForce Active Plus — common questions

Which coat does SeaForce Active Plus take in the system?

This model is typically used as intermediate coat / topcoat / antifouling. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for SeaForce Active Plus?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of SeaForce Active Plus?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to SeaForce Active Plus

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaForce Active Plus

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat