Offshore steel structures and ship coating (heavy-duty)
Model

SeaForce 60 M acrylic

Jotun's SeaForce 60 M is a acrylic primer / intermediate coat / topcoat / antifouling for immersion service / low-temperature application conditions, supplied with its technical documentation. For the complete technical data, request the manufacturer's TDS and SDS for SeaForce 60 M.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

SeaForce 60 M — product overview

one-component acrylic product for use as primer / intermediate coat / topcoat / antifouling; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment immersion service / low-temperature application.

SeaForce 60 M — positioning

Jotun's SeaForce 60 M is a acrylic primer / intermediate coat / topcoat / antifouling for immersion service / low-temperature application conditions, supplied with its technical documentation.

Three things decide the system: the substrate (carbon steel), the service environment (immersion service / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

This model is manufactured to the manufacturer's technical data sheet.

It is used for protective coating work in immersion service / low-temperature application conditions.

SeaForce 60 M — key data

ModelSeaForce 60 M
Manufacturer product name0YT
Resin systemacrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat / topcoat / antifouling
Service environmentimmersion service / low-temperature application
Suitable substratescarbon steel
Colour rangeRed / brown
Application methodairless spray / brush / roller
Volume solids62 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point27 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-seaforce-60-m.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C10 °C23 °C40 °C
Touch dry5 h2 h45 min30 min30 min
Recoat, minimum48 h36 h9 h7 h6 h

Data taken from the manufacturer's TDS jotun-seaforce-60-m.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer / intermediate coat / topcoat / antifouling; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the immersion service / low-temperature application environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

SeaForce 60 M — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for SeaForce 60 M, send a request at the foot of this page, or contact us on WhatsApp or by email.

SeaForce 60 M — common questions

Where can I find the technical data for SeaForce 60 M?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does SeaForce 60 M take in the system?

This model is typically used as primer / intermediate coat / topcoat / antifouling. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for SeaForce 60 M?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to SeaForce 60 M

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for SeaForce 60 M

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat