Offshore steel structures and ship coating (heavy-duty)
Model

Safeguard Universal ES temporary protective material

Safeguard Universal ES (0QZ) — in the Jotun range — is a temporary protective material product normally used as rust prevention (temporary protection) where atmospheric exposure conditions apply. For the complete technical data, request the manufacturer's TDS and SDS for Safeguard Universal ES.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Safeguard Universal ES — product overview

one-component temporary protective material product for use as rust prevention (temporary protection); manufactured to the manufacturer's technical data sheet; substrates carbon steel / stainless steel; service environment atmospheric exposure.

Safeguard Universal ES — positioning

Safeguard Universal ES (0QZ) is the temporary protective material rust prevention (temporary protection) in the Jotun range; this page sets out its system position, parameters and supply.

The substrate for this product is carbon steel / stainless steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Safeguard Universal ES — key data

ModelSafeguard Universal ES
Manufacturer product name0QZ
Resin systemtemporary protective material
Componentsone-component
Typical number of coatsrust prevention (temporary protection)
Service environmentatmospheric exposure
Suitable substratescarbon steel / stainless steel
Colour rangeTo the manufacturer colour card
Application methodspray or brush
Volume solids62 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point27 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-safeguard-universal-es.pdf)

Application and system notes

Application: spray or brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry24 h12 h8 h5 h2 h1.5 h
Walk-on dry44 h30 h24 h18 h10 h6 h
Recoat, minimum44 h30 h24 h18 h10 h6 h

Data taken from the manufacturer's TDS jotun-safeguard-universal-es.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as rust prevention (temporary protection); the number of coats and the quantity per unit depend on the surface condition of the carbon steel / stainless steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Safeguard Universal ES — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Safeguard Universal ES, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Safeguard Universal ES — common questions

What are the key characteristics of Safeguard Universal ES?

This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Safeguard Universal ES controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Safeguard Universal ES be used on?

The TDS lists the substrate as carbon steel / stainless steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Safeguard Universal ES

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Safeguard Universal ES

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat