Safeguard Plus temporary protective material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Safeguard Plus — product overview
This is a one-component temporary protective material product, typically used as rust prevention (temporary protection). It is characterised by fast-drying; service environment atmospheric exposure; suitable for protective coating of steel.
Safeguard Plus — positioning
Safeguard Plus is a temporary protective material rust prevention (temporary protection) from the Jotun range, formulated for steel structures in atmospheric exposure.
Three things decide the system: the substrate (steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Where fast-drying are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Safeguard Plus — key data
| Model | Safeguard Plus |
|---|---|
| Manufacturer product name | 5BP |
| Resin system | temporary protective material |
| Components | one-component |
| Typical number of coats | rust prevention (temporary protection) |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying |
| Colour range | To the manufacturer colour card |
| Application method | spray or brush |
| Volume solids | 56 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 27 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-safeguard-plus.pdf) |
Application and system notes
Application: spray or brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | -5 °C | 0 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 24 h | 12 h | 8 h | 3 h | 1 h | 30 min |
| Walk-on dry | 72 h | 36 h | 20 h | 10 h | 6 h | 3 h |
| Recoat, minimum | 96 h | 24 h | 18 h | 8 h | 5 h | 2 h |
| Dried/cured for service | 21 d | 14 d | 10 d | 7 d | 5 d | 3 d |
Data taken from the manufacturer's TDS jotun-safeguard-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Safeguard Plus follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Safeguard Plus — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Safeguard Plus, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Safeguard Plus — common questions
What service environment suits Safeguard Plus?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Safeguard Plus have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Safeguard Plus?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Safeguard Plus
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Safeguard Plus
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net