Offshore steel structures and ship coating (heavy-duty)
Model

Safeguard FRC PE II epoxy

Safeguard FRC PE II () — in the Jotun range — is a epoxy product normally used as primer / topcoat where atmospheric exposure conditions apply. This model offers abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Safeguard FRC PE II.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Safeguard FRC PE II — product overview

Safeguard FRC PE II belongs to the epoxy system and is a two-component product used as primer / topcoat; service environment atmospheric exposure; application and system notes are set out below.

Safeguard FRC PE II — positioning

Safeguard FRC PE II is the epoxy primer / topcoat in Jotun's protective coatings line, specified for atmospheric exposure service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where abrasion-resistant matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Safeguard FRC PE II — key data

ModelSafeguard FRC PE II
Manufacturer product name
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / topcoat
Service environmentatmospheric exposure
Key characteristicsabrasion-resistant
Colour rangelight red
Application methodairless spray
Volume solids55 % ± 2 %
Density (specific gravity)1 kg/l
Flash point24 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-safeguard-frc-pe-ii.pdf)

Application and system notes

Application: airless spray. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C30 °C40 °C
Touch dry14 h10 h7 h4 h3 h2 h
Recoat, minimum18 h12 h8 h6 h5 h4 h

Data taken from the manufacturer's TDS jotun-safeguard-frc-pe-ii.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Safeguard FRC PE II — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Safeguard FRC PE II, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Safeguard FRC PE II — common questions

What are the key characteristics of Safeguard FRC PE II?

This model offers abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Safeguard FRC PE II controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Safeguard FRC PE II be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Safeguard FRC PE II

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Safeguard FRC PE II

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat