Offshore steel structures and ship coating (heavy-duty)
Model

Pilot WF Primer acrylic

Pilot WF Primer is the acrylic primer / intermediate coat in Jotun's protective coatings line, specified for low-temperature application service. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Pilot WF Primer.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Pilot WF Primer — product overview

Pilot WF Primer belongs to the acrylic system and is a one-component product used as primer / intermediate coat; service environment low-temperature application; application and system notes are set out below.

Pilot WF Primer — positioning

Pilot WF Primer is a acrylic primer / intermediate coat from the Jotun range, formulated for steel structures in low-temperature application.

Three things decide the system: the substrate (carbon steel / stainless steel / concrete / coated surfaces), the service environment (low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

The model is notable for fast-drying.

It is used for protective coating work in low-temperature application conditions.

Pilot WF Primer — key data

ModelPilot WF Primer
Manufacturer product name0V6
Resin systemacrylic
Componentsone-component
Typical number of coatsprimer / intermediate coat
Service environmentlow-temperature application
Suitable substratescarbon steel / stainless steel / concrete / coated surfaces
Key characteristicsfast-drying
Colour rangeWhite / Red / Grey
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids46 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point101 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-pilot-wf-primer.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry1 h40 min30 min15 min
Walk-on dry3 h2 h1 h30 min
Recoat, minimum3 h2.5 h1 h1 h

Data taken from the manufacturer's TDS jotun-pilot-wf-primer.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / stainless steel / concrete / coated surfaces / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Pilot WF Primer — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Pilot WF Primer, send a request at the foot of this page, or contact us on WhatsApp or by email.

Pilot WF Primer — common questions

Which substrates can Pilot WF Primer be used on?

The TDS lists the substrate as carbon steel / stainless steel / concrete / coated surfaces; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Pilot WF Primer?

The service environment for this model is low-temperature application. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Pilot WF Primer have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Pilot WF Primer

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Pilot WF Primer

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat