Offshore steel structures and ship coating (heavy-duty)
Model

Pilot ACR acrylic

Pilot ACR (0AX) is the acrylic topcoat in the Jotun range; this page sets out its system position, parameters and supply. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Pilot ACR.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Pilot ACR — product overview

Pilot ACR belongs to the acrylic system and is a one-component product used as topcoat; service environment atmospheric exposure / low-temperature application; application and system notes are set out below.

Pilot ACR — positioning

Pilot ACR belongs to the acrylic family of Jotun protective coatings and is used as topcoat in atmospheric exposure / low-temperature application service.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

The model is notable for fast-drying.

It is used for protective coating work in atmospheric exposure / low-temperature application conditions.

Pilot ACR — key data

ModelPilot ACR
Manufacturer product name0AX
Resin systemacrylic
Componentsone-component
Typical number of coatstopcoat
Service environmentatmospheric exposure / low-temperature application
Key characteristicsfast-drying
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids55 % ± 2 %
Density (specific gravity)1.5 kg/l
Flash point25 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-pilot-acr.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-10 °C0 °C5 °C10 °C23 °C40 °C
Touch dry30 min30 min20 min15 min15 min15 min
Walk-on dry7 h7 h7 h5 h4 h4 h
Recoat, minimum3 h3 h3 h2 h1 h1 h

Data taken from the manufacturer's TDS jotun-pilot-acr.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure / low-temperature application environment.

Standards and approvals

Standards and approvals for Pilot ACR follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Pilot ACR — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Pilot ACR and the intended use.

Pilot ACR — common questions

How many components does Pilot ACR have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Pilot ACR?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Pilot ACR take in the system?

This model is typically used as topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Pilot ACR

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Pilot ACR

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat