Penguard Sealer WF epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Sealer WF — product overview
A two-component epoxy coating, normally used as topcoat: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on concrete.
Penguard Sealer WF — positioning
Penguard Sealer WF (05Y) — in the Jotun range — is a epoxy product normally used as topcoat where atmospheric exposure conditions apply.
The substrate for this product is concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Penguard Sealer WF — key data
| Model | Penguard Sealer WF |
|---|---|
| Manufacturer product name | 05Y |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | topcoat |
| Service environment | atmospheric exposure |
| Suitable substrates | concrete |
| Colour range | White |
| Application method | airless spray / brush / roller |
| Volume solids | 49 % ± 2 % |
| Flash point | 100 °C |
| Gloss | Semi-gloss (30-60) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-sealer-wf.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 4 h | 3 h | 1.5 h | 40 min |
| Walk-on dry | 24 h | 16 h | 10 h | 40 min |
| Recoat, minimum | 24 h | 16 h | 10 h | 3.5 h |
| Dried/cured for service | 21 d | 14 d | 7 d | 3 d |
Data taken from the manufacturer's TDS jotun-penguard-sealer-wf.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as topcoat; the number of coats and the quantity per unit depend on the surface condition of the concrete and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 2813
- ISO 3233
- ISO 3679
Standards and approvals for Penguard Sealer WF follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Sealer WF — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Penguard Sealer WF, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard Sealer WF — common questions
What are the minimum order quantity and lead time for Penguard Sealer WF?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Penguard Sealer WF?
This model offers manufactured to the manufacturer's technical data sheet. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Penguard Sealer WF controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Models related to Penguard Sealer WF
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Sealer WF
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net