Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Pro GF epoxy

Penguard Pro GF is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. This model offers high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Pro GF.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Pro GF — product overview

This is a two-component epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by high solids / high-build / surface-tolerant / abrasion-resistant; service environment atmospheric exposure / immersion service; suitable for protective coating of carbon steel / galvanised steel / stainless steel / concrete.

Penguard Pro GF — positioning

Penguard Pro GF belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service.

The substrate for this product is carbon steel / galvanised steel / stainless steel / concrete. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

Where high solids / high-build / surface-tolerant / abrasion-resistant are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure / immersion service.

Penguard Pro GF — key data

ModelPenguard Pro GF
Manufacturer product name0B5
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicshigh solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids75 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point32 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-pro-gf.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Penguard Pro GF — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Pro GF and the intended use.

Penguard Pro GF — common questions

Which substrates can Penguard Pro GF be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Penguard Pro GF?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Penguard Pro GF have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Models related to Penguard Pro GF

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Pro GF

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat