Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Primer epoxy

Penguard Primer is the epoxy primer in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Primer.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Primer — product overview

A two-component epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure / immersion service; suitable on steel.

Penguard Primer — positioning

Jotun's Penguard Primer is a epoxy primer for atmospheric exposure / immersion service conditions, supplied with its technical documentation.

Three things decide the system: the substrate (steel), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Typical service environment: atmospheric exposure / immersion service.

Penguard Primer — key data

ModelPenguard Primer
Manufacturer product name0FC
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure / immersion service
Colour rangeGrey / Red
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids51 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point25 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-primer.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry2 h1 h30 min
Walk-on dry14 h6.5 h3 h
Recoat, minimum8 h4 h3 h
Dried/cured for service14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-primer.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure / immersion service environment.

Standards and approvals

Standards and approvals for Penguard Primer follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Primer — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Primer and the intended use.

Penguard Primer — common questions

How many components does Penguard Primer have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Penguard Primer?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Penguard Primer take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Penguard Primer

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Primer

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat