Penguard HSP ZP epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard HSP ZP — product overview
This is a two-component epoxy product, typically used as primer. It is characterised by fast-drying / high solids / high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel.
Penguard HSP ZP — positioning
Penguard HSP ZP is the epoxy primer in Jotun's protective coatings line, specified for atmospheric exposure service.
Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Where fast-drying / high solids / high-build are specified, it combines with other products of the same system into a complete scheme.
It is used for protective coating work in atmospheric exposure conditions.
Penguard HSP ZP — key data
| Model | Penguard HSP ZP |
|---|---|
| Manufacturer product name | 0G7 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Key characteristics | fast-drying / high solids / high-build |
| Colour range | Light yellow / Red / dark grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 73 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 29 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-hsp-zp.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 11 h | 5 h | 2 h | 1 h | 30 min |
| Walk-on dry | 18 h | 12 h | 6 h | 3 h | 2 h |
| Recoat, minimum | 18 h | 12 h | 4 h | 2 h | 1 h |
| Dried/cured for service | 21 d | 13 d | 8 d | 4 d | 3 d |
Data taken from the manufacturer's TDS jotun-penguard-hsp-zp.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Penguard HSP ZP follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard HSP ZP — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
To get the manufacturer TDS and SDS for Penguard HSP ZP, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard HSP ZP — common questions
Which coat does Penguard HSP ZP take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Penguard HSP ZP?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
What are the key characteristics of Penguard HSP ZP?
This model offers fast-drying / high solids / high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.
Models related to Penguard HSP ZP
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard HSP ZP
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net