Offshore steel structures and ship coating (heavy-duty)
Model

Penguard HB epoxy

Jotun's Penguard HB is a epoxy primer / intermediate coat / topcoat for atmospheric exposure / immersion service conditions, supplied with its technical documentation. This model offers high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard HB.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard HB — product overview

two-component epoxy product for use as primer / intermediate coat / topcoat; high-build; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.

Penguard HB — positioning

Penguard HB is the epoxy primer / intermediate coat / topcoat in Jotun's protective coatings line, specified for atmospheric exposure / immersion service service.

Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel / concrete), the service environment (atmospheric exposure / immersion service) and the design life. Together they set the number of coats and the total film thickness.

Where high-build are specified, it combines with other products of the same system into a complete scheme.

Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.

Penguard HB — key data

ModelPenguard HB
Manufacturer product name370
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicshigh-build
Colour rangeGrey / Red / White
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids54 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point25 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-hb.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry5 h2.5 h1 h
Walk-on dry16 h8 h3.5 h
Recoat, minimum16 h8 h3.5 h
Dried/cured for service14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-hb.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / concrete / atmospheric exposure / immersion service) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Penguard HB — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

To get the manufacturer TDS and SDS for Penguard HB, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard HB — common questions

How is the recoat interval for Penguard HB controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Penguard HB be used on?

The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Penguard HB?

The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Penguard HB

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard HB

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat